HPE 5500 HI 交换机系列
HPE 5500 HI 交换机系列在大型园区和分支机构网络的边缘层提供出色的弹性、安全性和多服务支持。 HP 5500 HI 具有强大的功能集，支持 1440 W PoE+、固定和模块化 10GbE、9 机箱 IRF 堆叠、静态和 RIP 路由、OSPF、MPLS、ACL、IPv6 和节能以太网。
HP 5500 HI 交换机系列提供先进的技术，包括 OAM、CFD、多级服务质量 (QoS)、MPLS 和 VPLS，并可通过 HP 智能管理中心 (IMC) 进行管理，以获得整个网络的单一视图。
高弹性和多服务支持。
增强的 MPLS/VPLS 支持和全功能 IPv4/IPv6 双堆栈。
使用双电源提供 1440 W PoE+ 电源，实现高弹性。
OpenFlow 1.3 支持。
有限终身保修 2.0，提供 3 年 24x7 电话支持。
特点与优势：
高弹性、更安全和可扩展性
HP 5500 HI 交换机系列在数据中心和大型园区网络的边缘层提供出色的弹性、安全性和多服务支持功能。 先进技术包括OAM、CFD、RRPP、BFD、多级QoS、MPLS、VPLS。
提供具有固定或模块化 10GbE 上行链路（SFP+ 和 10GBASE-T）的可扩展堆叠以及高达 1440 W 的 PoE+ 电源以及双冗余热插拔电源，以实现增长和可靠性。 惠普智能弹性结构 (IRF) 将多达 9 个物理交换机虚拟成一台逻辑设备，从而实现更简单、更扁平、更灵活的网络。
5500 HI 支持 IPv6 和全功能的 L3 功能，包括 RIP、OSPF、ISIS、BGP 和 PIM。
包括软件定义网络 (SDN) 功能和 OpenFlow 1.3 支持，以确保您的网络面向未来。
有限终身保修 2.0，提供 3 年 24x7 电话支持，无需软件许可。
强大的性能和更高的安全级别
5500 HI 交换机系列通过基于硬件的线速访问控制列表 (ACL) 提供更高级别的安全性。
提供简单的管理，而不影响网络性能，提供功能丰富的基于 TCAM 的 ACL 实施。
无阻塞架构通过无阻塞交换结构提供高达 224 Gbps 的线速交换和高达 167 Mpps 的吞吐量。
强大的服务质量 (QoS)
HPE 5500 HI 交换机系列支持基于分类器的高级 QoS，该 QoS 使用基于第 2、3 和 4 层信息的多个匹配标准来引导流量。 它将 QoS 策略应用于端口、VLAN 或整个交换机上的选定流量，例如设置优先级和速率限制。
根据 ACL、IEEE 802.1p 优先级、IP 和 DSCP 或服务类型 (ToS) 优先级创建流量类别。 支持过滤、重定向、镜像或注释任务。
通过拥塞操作获得广泛的流量优先级：严格优先级 (SP) 排队、加权循环 (WRR)、加权公平排队 (WFQ)、加权随机早期丢弃 (WRED)、加权赤字循环 (WDRR)、SP+WDRR 和 SP+WFQ。
全面的安全控制和单一网络视图
HPE 5500 HI 交换机系列支持灵活的身份验证方法，包括 802.1X、MAC 和 Web，以实现更高的策略驱动的应用程序安全性。
该系列通过自动 VLAN 分配提供身份驱动的安全和访问控制。 每用户 ACL 允许访问特定的网络服务，而不会危及网络安全。 安全功能包括：IP 源防护、DHCPv6 监听、STP BPDU 端口保护、RADIUS/HWTACACS 和 SSL。
可与惠普智能管理中心 (IMC) 无缝管理，通过全面的配置、合规性和策略管理，提供端到端网络透明度和一致的网络体验。
RMON 和 sFlow 为统计数据、历史记录、警报和事件提供高级监控和报告功能。
系列规格表:
| 5500-24G-4SFP | 5500-48G-4SFP | 5500-24G-PoE+-4SFP | |
|---|---|---|---|
| Part Numbers | HP 5500-24G-4SFP HI Switch with 2 Interface Slots (JG311A) | HP 5500-48G-4SFP HI Switch with 2 Interface Slots (JG312A) | HP 5500-24G-PoE+-4SFP HI Switch with 2 Interface Slots (JG541A) |
| Ports | |||
| 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
Media Type: Auto-MDIX Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 SFP fixed Gigabit Ethernet SFP ports 2 port expansion module slots 1 RJ-45 serial console port 2 SFP+ Supports a maximum of 24 autosensing 10/100/1000 ports |
48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
Media Type: Auto-MDIX Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 SFP fixed Gigabit Ethernet SFP ports 2 port expansion module slots 1 RJ-45 serial console port 2 SFP+ Supports a maximum of 48 autosensing 10/100/1000 ports |
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 fixed Gigabit Ethernet SFP ports 2 SFP+ 10GbE ports 2 port expansion module slots Supports a maximum of 38 autosensing 100/1000 ports, with optional module 1 RJ-45 serial console port 1 RJ-45 out-of-band management port |
|
| Power supplies | |||
| 2 power supply slots
1 minimum power supply required (ordered separately) |
2 power supply slots
1 minimum power supply required (ordered separately) |
2 power supply slots
1 minimum power supply required (ordered separately) |
|
| Physical characteristics | |||
| 14.17(w) x 17.32(d) x 1.72(h) in (35.99 x 43.99 x 4.37 cm) (1U height) | 16.54(w) x 17.32(d) x 1.72(h) in (42.01 x 43.99 x 4.37 cm) (1U height) | 17.32(w) x 18.11(d) x 1.72(h) in (43.99 x 46 x 4.37 cm) (1U height) | |
| Weight | 16.53 lb (7.5 kg), Fully loaded | 18.74 lb (8.5 kg) | 22.05 lb (10 kg) shipping weight |
| Memory and processor | |||
| 1 GB SDRAM, 512 MB flash; packet buffer size: 3 MB | 1 GB SDRAM, 512 MB flash; packet buffer size: 6 MB | 1 GB SDRAM, 512 MB flash; packet buffer size: 3 MB | |
| Mounting | |||
| Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included) | Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included) | Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included) | |
| Performance | |||
| 1000 Mb Latency | < 5 µs | < 5 µs | < 5 µs |
| 10 Gbps Latency | < 3 µs | < 3 µs | < 3 µs |
| Throughput | 130.9 million pps | 166.6 million pps | up to 130.9 million pps |
| Routing/Switching capacity | 176 Gbps | 224 Gbps | 176 Gb/s |
| Routing table size | 12000 entries | 12000 entries | 12000 entries |
| Environment | |||
| Operating temperature | 32°F to 122°F (0°C to 50°C) | 32°F to 122°F (0°C to 50°C) | 32°F to 113°F (0°C to 45°C) |
| Operating relative humidity | 5% to 95%, noncondensing | 5% to 95%, noncondensing | 5% to 95%, noncondensing |
| Nonoperating/Storage temperature | -40°F to 158°F (-40°C to 70°C) | -40°F to 158°F (-40°C to 70°C) | -40°F to 158°F (-40°C to 70°C) |
| Nonoperating/Storage relative humidity | 5% to 95%, noncondensing | 5% to 95%, noncondensing | 5% to 95%, noncondensing |
| Acoustic | Low-speed fan: 47.9 dB, High-speed fan: 51.1 dB | Low-speed fan: 48.6 dB, High-speed fan: 57.6 dB | Low-speed fan: 41.0 dB, High-speed fan: 64.0 dB; ISO 7779 |
| Electrical characteristics | |||
| Maximum heat dissipation | 481 BTU/hr (507.46 kJ/hr) | 651 BTU/hr (686.81 kJ/hr) | 460 BTU/hr (485.3 kJ/hr) |
| Maximum power rating | 740 W | ||
| Frequency | 50/60 Hz | 50/60 Hz | 50/60 Hz |
| Notes | Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. | Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. | Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the maximum power available from the required power supply or supplies. Device supports 1 or 2 internal modular power supplies. JG544A will supply up to 450 watts of PoE+ power per installed unit. JG545A will supply up to 740 watts of PoE+ power per installed unit to the extent needed by the installation |
| Safety | |||
| UL 60950-1EN 60825-1 Safety of Laser Products-Part 1EN 60825-2 Safety of Laser Products-Part 2IEC 60950-1CAN/CSA-C22.2 No. 60950-1EN 60950-1/A11FDA 21 CFR Subchapter JROHS Compliance | UL 60950-1EN 60825-1 Safety of Laser Products-Part 1EN 60825-2 Safety of Laser Products-Part 2IEC 60950-1CAN/CSA-C22.2 No. 60950-1EN 60950-1/A11FDA 21 CFR Subchapter JROHS Compliance | UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; FDA 21 CFR Subchapter J; ROHS Compliance; AS/ NZS 60950-1; GB 4943 | |
| 5500-48G-PoE+-4SFP | 5500-24G-4SFP | |
|---|---|---|
| Part Numbers | HP 5500-48G-PoE+-4SFP HI Switch with 2 Interface Slots (JG542A) | HP 5500-24G-SFP HI Switch with 2 Interface Slots (JG543A) |
| Ports | ||
|
48 RJ-45 autosensing 10/100/1000 PoE+ ports; Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only 4 fixed Gigabit Ethernet SFP ports 2 SFP+ 10GbE ports 2 port expansion module slots Supports a maximum of 70 autosensing 100/1000 ports, with optional module 1 RJ-45 serial console port 1 RJ-45 out-of-band management port |
24 fixed Gigabit Ethernet SFP ports 4 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 SFP+ 10GbE ports 2 port expansion module slots Supports a maximum of 12 autosensing 10/100/1000 ports, with optional module 1 RJ-45 serial console port RJ-45 out-of-band management port |
|
| Power supplies | ||
|
2 power supply slots 1 minimum power supply required (ordered separately) |
2 power supply slots
1 minimum power supply required (ordered separately) |
|
| Physical characteristics | ||
| 17.32(w) x 18.11(d) x 1.72(h) in (43.99 x 46 x 4.37 cm) (1U height) | 17.32(w) x 14.17(d) x 1.72(h) in (43.99 x 35.99 x 4.37 cm) (1U height) | |
| Weight | 23.15 lb (10.5 kg) | 16.53 lb (7.5 kg) |
| Memory and processor | ||
| 1 GB SDRAM, 512 MB flash; packet buffer size: 6 MB | 1 GB SDRAM, 512 MB flash; packet buffer size: 3 MB | |
| Mounting | ||
| Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included) | Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included) | |
| Performance | ||
| 1000 Mb Latency | < 5 µs | < 5 µs |
| 10 Gbps Latency | < 3 µs | < 3 µs |
| Throughput | up to 166.6 million pps | up to 130.9 million pps |
| Routing/Switching capacity | 224 Gb/s | 176 Gb/s |
| Routing table size | 12000 entries (IPv4), 6000 entries (IPv6) | 12000 entries (IPv4), 6000 entries (IPv6) |
| MAC address table size | 32000 entries | 32000 entries |
| Environment | ||
| Operating temperature | 32°F to 113°F (0°C to 45°C) | 32°F to 122°F (0°C to 50°C) |
| Operating relative humidity | 5% to 95%, noncondensing | 5% to 95%, noncondensing |
| Nonoperating/Storage temperature | -40°F to 158°F (-40°C to 70°C) | -40°F to 158°F (-40°C to 70°C) |
| Nonoperating/Storage relative humidity | 5% to 95%, noncondensing | 5% to 95%, noncondensing |
| Acoustic | Low-speed fan: 48.3 dB, High-speed fan: 54.0 dB; ISO 7779 | Low-speed fan: 48.3 dB, High-speed fan: 54.0 dB; ISO 7779 |
| Electrical characteristics | ||
| Maximum heat dissipation | 666 BTU/hr (702.63 kJ/hr) | 460 BTU/hr (485.3 kJ/hr |
| Maximum power rating | 195 W | 135 W |
| PoE power | 1440 W | |
| Notes | Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies. Device supports 1 or 2 internal modular power supplies. JG544A will supply 450 watts of PoE+ power per installed unit. JG545A will supply up to 800 watts of PoE+ power per installed unit. | Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. |
| Safety | ||
| UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; FDA 21 CFR Subchapter J; ROHS Compliance; AS/NZS 60950-1; GB 4943 | UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; FDA 21 CFR Subchapter J; ROHS Compliance; AS/NZS 60950-1; GB 4943 | |
